AutoFEM Buckling Analysis 1.7 
06/19/2012 

Category:
Graphics & Multimedia / 3D Modeling & CAD

Description of AutoFEM Buckling Analysis AutoFEM Buckling Analysis is usefull in designing structures, operation of which involves a lasting impact on the intensity of various loads. With this module the user can obtain the safety margin for the socalled "Critical load"  load at which the design can be a significant leap inelastic deformation, often leading to its destruction or serious damage. In the parameters of the problem of stability one can determine the number of forms of equilibrium states to be determined and other parameters of the calculation.
As result of buckling analysis, values of the coefficients of the critical loads at which there is loss of stability are obtained, as well as appropriate forms of instability.
The critical load factor  the estimated value of the coefficient whose product on applied load, gives the actual value of the critical load, causing the system to a new equilibrium. For example, the model is applied distributed force 1000 N. ratio of the critical load of the calculation results was 109.18. This means that the first form of stable equilibrium for this model has a critical load 109180 N.
The relative displacement (buckling mode) is a shape of the equilibrium steady state corresponding to a certain critical load. Forms of equilibrium states that are displayed in the window Postprocessor after the calculation represent the relative displacement. Analysing these forms you can draw conclusions about the nature of displacement in situations of instability. Knowing the expected equilibrium shape at a certain critical load, can, for example, to specify additional fastening or support in the field of design corresponding to the peak of this form of equilibrium, which would effectively change the mechanical properties of the product.
• Operating System : Windows XP, Windows Vista, Windows 7, Windows 2000

Windows 2000, Windows XP, Windows Vista 
Screenshot 


More Similar Software 

AutoFEM Buckling Analysis 1.0
...
AutoFEM Buckling Analysis is usefull in designing structures, operation of which involves a lasting impact on the intensity of various loads. With this module the user can obtain the safety margin for the socalled "Critical load"  load at which the design can be a significant leap inelastic deformation, often leading to its destruction or serious damage. In the parameters of the problem of stability one can determine the number of forms of equilibrium states to be determined and
...


AutoFEM Static Analysis 1.0
...
AutoFEM Static Analysis provides the calculation of the stress state of the structures under the forces which are constant in time. To date probably this is the most requested task in the design. By using the module "Static analysis" an engineer can evaluate the allowable stresses in design which is developed, determine the most weaknesses in the design and make the necessary changes (optimize) the product.
Static analysis also allows:
take into account the geometric
...


AutoFEM Thermal Analysis 1.0
...
AutoFEM Thermal Analysis provides a calculation of the temperature behaviour of products under the action of sources of heat and radiation. Thermal analysis can be used independently to calculate the temperature and thermal field of the design, as well as in conjunction with static analysis to assess the resulting of thermal deformation.
In AutoFEM Thermal Analysis the heat conduction problem has two statement:
 steadystate thermal conductivity  the calculation of the steady (stationary)
...


AutoFEM Fatigue Analysis 1.7
...
The AutoFEM Fatigue Analysis module is used in conjunction with AutoFEM Static Analysis and allows one to evaluate the strength of a structure, which is subjected to cyclic loading. This type of loading is usual in mechanical and structural engineering. The problem is that,when the load is constant, the strength of the structure load may prove to be sufficient. But if this load alternates frequently fatigue of the material occurs and the structure can be damaged or even crushed despite static
...


AutoFEM Analysis 1.7
...
AutoFEM Analysis is the finite element analysis software for structural and mechanical engineering.
Main Features :
• Using AutoFEM Analysis, an AutoCAD user gets a possibility to solve the problem of finiteelement modeling of various physical phenomena:
+ Static analysis (analysis of structural stress and strain)  the AutoFEM Static Analysis module;
+ Stress analysis for structures under cyclic loading action  the AutoFEM Fatigue Analysis module;
+ Calculation of
...




Submit Rating 

Editor Rating = 5 



Author: 
AutoFEM Software LLP 
License: 
Shareware 
Price: 
$1495 
File Size: 
175.5 MB 
Downloads: 
149 







